Analog Way Pulse User Manual
Page 21
The
PLS300
rear panel is equipped with 6 universal digital and analog inputs. Inputs #1 through #4 (4) are
universal analog inputs. Inputs #5 & #6 share a DVI-D signal and a universal analog signal (plug the shipped
Analog Way DVI/DB15 adaptor cable to use DVI-D and analog signals simultaneously).
The Main and Preview (7) outputs will allow for the
PLS300
high resolution digital and analog signals to be
viewed on screen and/or on a preview monitor (see also Output Specifications in this chapter).
Finally, the audio in and output card will let users trigger audio with any source, accurately balance or tweak
sound sources and output.
1 : AC outlet and On/off switch
2 : RS232 connector
3 : IP-LAN connector
4 : Universal Analog inputs
5 : DVI-D inputs
6 : HD-SDI inputs
7 : Main and Preview outputs
8 : Audio inputs
9 : Audio output
Overview
3-2. THE PLS300 REAR PANEL
19
2
1
4
5
7
8
9
3
6