Analog Way Pulse User Manual
Page 51
Advertising
![background image](/manuals/327156/51/background.png)
To configure audio settings of the
PLS300
, plug all audio inputs into
the device, and click on the Audio tab of the RCS home page.
1/ Set the Main audio output level and delay (accessible only if Delay
Mode is set to Manual Adjust, see also the “Audio Configuration”
chapter, page 32), or click the Mute button to mute Main audio
output.
2/ Individual source settings (level and balance) for each audio input
can be configured in the right hand section of the Audio tab.
Audio Configuration
49
Advertising