Analog Way Pulse - Manual (Page 44)

Your Pulse is shipped with a Windows compatible control software. The RCS software allows you to control
your PLS300 in exactly the same way as with the front panel of the device, only using your PC as a remote.
5-1. THE PULSE RCS
RCS presentation
REMOTE CONTROL SOFTWARE
How to use the RCS ?
You have to install the software on a Computer (Windows based only) and have a LAN board or RS-232 link
to use the RCS. After the installation, launch the program and proceed to the network establishment.
Software installation
1. Connect you on www.analogway.com .
2. In the menu, select [ Technical Support ] menu, then click on [ Remote Control Software ], select the name
of your device and click on [ Download ].
3. Click on [ Open with ] or [ Register the file ], select the .exe file.
4. Follow the Windows installation instructions.
!
Not compatible with Apple computers
42