Analog Way Octo Value - Manual (Page 20)

• FADE COLOR :
The FADE COLOR allows switching between 2 sources with a fading to a color of you choice. This transition operates in
Fast Switching mode and sometimes in Seamless mode (only when the other effects are not possible). You can select
the color of the fading with the LCD CONTROL menu.
• CLEAN CUT :
The CLEAN CUT allows a clean switch thanks to a fast freeze of the displayed source. Activate the CLEAN CUT with
the LCD menu (CONTROLS > transition > clean cut).
• PIP :
The PIP effect allows to insert a source onto the reference computer input or onto a frame. This effect is only possible
between the reference input/frame and the other inputs.
Display on the MAIN output the reference computer input or a frame (input #1 in this example).
a) Pre-select the input used for the PIP effect (input #3 in this example). The LED is blinking.
b) Select an EFFECT PRESET, then assign it the PIP effect. You can then adjust position and size of your PIP.
c) Press TAKE. The PIP appears onto the displayed image.
NOTE : To turn OFF the PIP, press TAKE.
d) You can change the background image during a PIP effect (between the reference input & the frames store).
Press the reference input selection button or Fn button plus the desired frame selection button. The transition of
the background operates seamlessly.
e) You can change the PIP source (between the other inputs except for the reference input). Press the desired input
selection button. The transition of the PIP operates with a fade to black or a customized color.
PAGE 19
Reference input #1 (MAIN) Input #3 (PREVIEW) Displayed image (MAIN)
TAKE
b)
c) a)
Background = reference input #1
PIP = Input #3
Background = frame #1
PIP = Input #3
Background = frame #1
PIP = Input #4
d) e)
Frame #1 selection Input #4 selection