Analog Way Octo Value User Manual
Page 33
5-3-5 [
Luma key level
] + ENTER.
This function allows “erasing” the darkest portion of your logo area in order to make special logo contour. Ad-
just the luma key level with ◄► + ENTER.
5-3-6 [
Back. Color
] + ENTER.
This function allows coloring the “erased portions” of the logo when using the luma key. Select a level with
◄►+ ENTER.
5-3-7 [
Recording time
] + ENTER.
Adjust the recording time with ◄► + ENTER.
5-3-8 [
Store
] + ENTER.
This function allows storing the logo into the memory. The memorization will take few seconds.
5-4
[
Record frame
]
+ ENTER.
This mode allows storing up to 4 frames in order to display them at any time during the show.
5-4-1 [H position] + ENTER.
Adjust the Horizontal position of the frame area with ◄► + ENTER.
5-4-2 [V position] + ENTER.
Adjust the Vertical position of the frame area with ◄► + ENTER.
5-4-3 [H size] + ENTER.
Adjust the Horizontal size of the frame area with ◄► + ENTER.
5-4-4 [V size] + ENTER.
Adjust the Vertical size of the frame area with ◄► + ENTER.
5-4-5 [Luma key level] + ENTER.
This function allows “erasing” the darkest portion of your frame in order to make special frame contour. Adjust
the luma key level with ◄► + ENTER.
5-4-6 [Store]
This function allows storing the displayed image (frame) into a one of the 4 memories. Presses ENTER to start
the memorization of the frame. The memorization will take about 2 minutes.
5-5
[
Erase logo
]
+ ENTER.
This function allows erasing the memorized logos. Select an item with ◄► + ENTER.
5-6
[
Erase frame
]
+ ENTER.
This function allows erasing the memorized frames. Select an item with ◄► + ENTER.
PAGE 32