Analog Way Octo Value - Manual (Page 40)

• CASE OF LAN PORT :
- With the front panel display menu of the device, verify the configuration of the LAN communication port
(CONTROL > LAN setup), then activate the LAN communication port (CONTROL > RS232/LAN port > LAN).
- With the Control menu of the software, select RS232/LAN setup and LAN Setup. Then configure the Local
port, the Remote IP address and the Remote port and click on Apply to setup the new values. The software will
also display Device connected.
① Click on the Settings button (left bottom of the window) to display the Settings window.
② Click on the Input Settings tab and select the Signal Type for each input. Then make the other adjustments
(video Standard...).
7-4. USING THE SOFTWARE
③ Click on the Output tab, then select the Switching mode (internal rate, input #- rate, or seamless), then select
the desired adjustment (output sync, output format, output rate...).
PAGE 39