Analog Way Octo Value - Manual (Page 23)

4-2. USING THE FRAME
This function allows memorizing up to 4 frames (images) in order to display them at any time during the show.
IMPORTANT : The output format used when displaying the frame should be the same as the one used during
the FRAME storing.
• HOW TO STORE A FRAME :
1) Select the source to be stored as a frame (with the INPUT SELECTION buttons).
2) Select the record frame mode (LOGOS/FRAME > record frame) : the device displays a white rec-
tangle corresponding to the frame selection area onto the output. If necessary adjust the position and
size of the frame selection area ( IMAGE > pos settings).
3) Store the frame ( LOGOS/FRAME > record frame > store). The memorization starts and will take about
2 minutes.
NOTE : For motion picture, use the FREEZE function, before doing the memorization.
• HOW TO DISPLAY the FRAME ON or OFF :
4) To turn the FRAME ON, select a Frame selection button on the front panel ( Fn then F1, F2, F3 or F4)
then press TAKE.
5) To turn the FRAME OFF, select an input selection button, then press TAKE.
PAGE 22