Analog Way Octo Value User Manual
Page 28
5-5. FUNCTIONS DESCRIPTION
1►
[SWITCHING] + ENTER.
1-1
[
Fast switching
]
+ ENTER.
Select an item with ◄► + ENTER.
• [
Internal rate
] : The output frame rate is 60 Hz or 75 Hz depending of the selected output format. A higher frame
frequency gives a better visual aspect when displaying static pictures.
• [
Follow # x
] : The output frame rate is identical to the selected input Frame Rate : 50 Hz if the input video
standard is PAL or SECAM and 59.94 Hz if the input video standard is NTSC. This function
allows improving the motion pictures.
1-2
[
Seamless
]
+ ENTER.
Select the computer input used as reference with ◄► + ENTER.
• [
Seamless #1
] :
The device is in Seamless mode. The output format & rate are the same as computer #1.
• [
Seamless #8
] :
The device is in Seamless mode. The output format & rate are the same as computer #8.
2►
[INPUT] + ENTER.
2-1
[
Auto settings
]
+ ENTER.
This function detects automatically the input type of each source connected to the inputs.
2-2
[
Input status
] + ENTER.
Indicates the status of the selected input.
2-3
[
Input type
]
+ ENTER.
①
Select an input with ◄► + ENTER.
②
Select the input signal type with ◄► + ENTER between :
• [
SDTV Composite]
•
[
SDTV RGB SOG]
• [
SDTV S.VIDEO]
•
[
SDTV RGBS ana.]
• [
SDTV YUV]
•
[
Computer SOG]
• [
SDTV RGBS TTL]
•
[
Computer HV/C]
• [
Computer DVI]
• [
HDTV] : HDTV input format (720p, 1035i and 1080i).
• [
Audio only] : Select this function if you only want to connect an audio source (no video signal needed).
③
Then for [
SDTV Composite] and [SDTV S.VIDEO], select the video standard with ◄► + ENTER between :
• [
NTSC / PAL / SECAM
] : automatic NTSC, PAL, and SECAM standard detection.
• [
NTSC
] : NTSC standard detection only.
• [
PAL
] : PAL standard detection only.
• [
NTSC 4.43 60 Hz
] : NTSC 4.43 60Hz detection.
• [
PAL 4.43 60Hz
] : PAL 4.43 60Hz detection.
• [
SECAM
] : SECAM standard detection only.
• [
B & W 50/60 Hz
] : Black and White detection.
2-4
[
used input
]
+ ENTER.
Select an input and then select an item ◄► + ENTER between :
• [
used
] : A signal is connected to the input.
• [
unused
] : No signal is connected to the input. The input is unused.
2-5
[
H sync load
] + ENTER.
Select for each input the load of the H Sync. with ◄► + ENTER.
2-6
[
VCR mode
]
+ ENTER.
This function allows improving the image contour of low quality VHS tapes. Select [on] with ENTER.
2-7
[
VIS
] + ENTER.
This function allows defining the sources which are synchronized together (external genlock). The synchroni-
zed sources can be seamlessly switched between themselves during an effect (into a PIP for example). This
switching mode is called VIS (Vertical Interval Switching).
PAGE 27