Analog Way Octo Value User Manual
Page 32
5► [LOGOS/FRAME] + ENTER
5-1
[
Use logo
]
+ ENTER.
Select an item with ◄► + ENTER.
5-1-1 [
Display
] + ENTER.
This function allows turning the assigned logos of each input ON or OFF. Select an input with ◄► and press
ENTER to select ON or OFF.
NOTE : To display a logo the output format should be the same as the one used during the storing.
5-1-2 [
Assignment
] + ENTER.
This function allows assigning the stored logos to an input device (up to 2 logos simultaneously).
①
Select an input with ◄► + ENTER.
②
Select INDEX 1 or INDEX 2 with ◄► + ENTER.
③
Then select a logo or none with ◄► + ENTER.
5-1-3 [
Position
] + ENTER.
Adjust the logo position with H & V position functions.
5-1-4 [
Transparency
] + ENTER.
This function allows adjusting the logo transparency.
5-1-5 [
Fade duration
] + ENTER.
This function allows adjusting the fade duration of the logo when you turn ON or OFF a logo. Adjust the duration
with ◄► and validate with ENTER.
5-2
[
Record logo
]
+ ENTER.
This mode allows storing up to 8 logos in order to key them on the displayed image (up to 2 logos simulta-
neously). Select an item with ◄► + ENTER.
5-2-1 [
H position
] + ENTER.
Adjust the Horizontal position of the logo area with ◄► + ENTER.
5-2-2 [
V position
] + ENTER.
Adjust the Vertical position of the logo area with ◄► + ENTER.
5-2-3 [
H size
] + ENTER.
Adjust the Horizontal size of the logo area with ◄► + ENTER.
5-2-4 [
V size
] + ENTER.
Adjust the Vertical size of the logo area with ◄► + ENTER.
NOTE : The logo area is limited to one eighth (1/8) of the displayed area.
5-2-5 [
Luma key level
] + ENTER.
This function allows “erasing” the darkest portion of your logo area in order to make special logo contour.
Adjust the luma key level with ◄► + ENTER.
5-2-6 [
Back. Color
] + ENTER.
This function allows coloring the “erased portions” of the logo when using the luma key. Select a level with ◄►
+ ENTER.
5-2-7 [
Store
] + ENTER.
This function allows storing the logo into one of the 8 memories. Select a logo memory with ◄► + ENTER. The
memorization will take few seconds.
5-3
[
Record anim
]
+ ENTER.
This mode allows storing an animated logo in order to key them into the displayed image. Select an item with
◄► + ENTER.
5-3-1 [
H position
] + ENTER.
Adjust the Horizontal position of the logo area with ◄► + ENTER.
5-3-2 [
V position
] + ENTER.
Adjust the Vertical position of the logo area with ◄► + ENTER.
5-3-3 [
H size
] + ENTER.
Adjust the Horizontal size of the logo area with ◄► + ENTER.
5-3-4 [
V size
] + ENTER.
Adjust the Vertical size of the logo area with ◄► + ENTER.
NOTE : The logo area is limited to one eighth (1/8) of the displayed area.
PAGE 31