Datamax-O'Neil Class Series II Programmer’s Manual - Manual (Page 65)

Extended System-Level Command Functions
Class Series 2 Programmer’s Manual 51
<STX>Kc
Parameter Name
Parameter
Pneumonic
Value /
Range
Units /
Interpretation
Menu Item (or Number)
(if available)
Command
Equivalent
Ignore Control Codes
IC
Y, N
1, 0
Y = Enabled,
N = Disabled
1 = Enabled,
0 = Disabled
Communications
N/A
Ignore Distances IE 1, 0
1 = Enabled,
0 = Disabled
N/A N/A
Imaging Mode
IL
M, S
M = Multiple label,
S = Single label
System Settings (22)
N/A
Input Mode
EM
0, 1, 3, 7, 9
0 = DPL,
1 = Line,
3 = PL-Z,
7 = PL-B,
9 = Auto
System Settings (19)
N/A
Internal Module IM
100 – up to max.
available; see
Appendix K
Kbytes System Settings (15) N/A
(continued)