Datamax-O'Neil Class Series II Programmer’s Manual - Manual (Page 73)

Extended System-Level Command Functions
Class Series 2 Programmer’s Manual 59
<STX>Kc
Parameter Name
Parameter
Pneumonic
Value /
Range
Units /
Interpretation
Menu Item (or Number)
(if available)
Command
Equivalent
Sensor Type ST G, C, R
G = Gap (edge),
C = Continuous,
R = Reflective
Media Settings (2) <STX>e,
<STX>r,
<STX>c
Serial Port SP xyz See Table 5-12.
Communications
9 & 10
N/A
Single Byte Symbol Set AS
2-Byte alpha
character
AA – ZZ, printer
resident symbol set
System Settings
<STX>y,
ySxx
Slew Speed FS Alpha character
Model specific
ranges; see
Appendix L.
Print Control <STX>KZSx
Software Switch
SV
Y, N
Y = Processed
N = Ignored
Communications N/A
(continued)