4 t-bolts, Figure 3 xlat – FlexLink WL322 (322 мм) Монтаж User Manual
Page 15
Advertising
Fasteners
C
rea
ted by
EBCCW
00:
06
11
5683EN-1
4.4
T-bolts
Figure 3 XLAT
T-bolts can be entered from the beam side, and when turned 90
° they will
stay in place after tightening with nuts (XLAN 8) and washers (BRB
8,4×16). The indication groove in the T-bolt should be at 90° to the convey-
or T-slot.
T-bolts are used when attaching support brackets, guide rails and drip trays
to the conveyor beam. Do not use T-bolts with support beams!
Advertising
This manual is related to the following products: