FlexLink WL322 (322 мм) Монтаж - Manual (Page 23)

Drive and idler unit assembly
C
rea
ted by
EBCCW
00:
06
19 5683EN-1
8 Drive and idler unit assembly
This step is to mount drive and idler units to the frame structure. All drive
and idler units come with connecting strips included. Attach them to the
conveyor beam using an Allen key and the set screws that are included.
Drive units can be attached to supports of various kinds; check your draw-
ing to see how your conveyor is designed.
It should be remembered that conveyor belt should always be pulled, not
pushed, by the drive unit.
1.
2.