Burkert Type 0789 - Manual (Page 7)

7
GeneralInformation
danger of explosion caused by electrostatic charge!
If there is a sudden discharge from electrostatically charged
devices or persons, there is a danger of explosion in the Ex area.
• Take appropriate measures to prevent electrostatic charges in
the Ex area.
• Clean the device surface by gently wiping it with a damp or
antistatic cloth.
general hazardous situations.
To prevent injury, ensure that:
• That the system cannot be activated unintentionally.
• That no unauthorized changes are performed on the system.
• Only expert and instructed personnel with appropriate tools
carry out any work on the system.
• The device may be operated only when in perfect condition and
in consideration of the operating instructions.
• The general rules of technology apply to application planning
and operation.
4. general infOrmaTiOn
4.1. contact address
Germany
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: [email protected]
International
Contact addresses can be found on the final pages of the printed
operating instructions.
And also on the Internet under:
www.burkert.com
4.2. Warranty
The warranty is only valid if the device is used as intended in accordance
with the specified application conditions.
4.3. information on the internet
The operating manual and the data sheets can be found on the Internet
under:
www.burkert.com
english
PTB 03 ATEX 1030 X