Unilinc and m30 control models, Warning, Crush hazard – Alliance Laundry Systems Extractors P232156R9 User Manual
Page 19
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Basic Installation/Operation
17
F232156
UniLinc and M30 Control Models
Dimensional Clearances
Allow a minimum of 24 inches (60 cm) at the rear and
6 inches (45 cm) at the sides for maintenance,
inspection, and adjustment. Allow at least 6 inches
(45 cm) between machines in multiple installations.
Machine dimensions are indicated in Table 6 and
specified in Figure 1 and Figure 2.
NOTE: The dimensions shown here are for
planning purposes only. They are approximate and
subject to normal manufacturing tolerances. If
exact dimensions are required for construction
purposes, contact the distributor or the
manufacturer. We reserve the right to make
changes at any time without notice.
Crush hazard.
To avoid personal injury and/or property
damage, do not tip the UW150 machine
more than 25 degrees in any direction.
W642
WARNING
UniLinc and M30 Control Pocket Hardmount Machine Dimensions (Refer to Figure 1 and Figure 2)
Dimension
35
60
80
100
125
150
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
A
30.125
765
35.625
905
41.125
1045
41.125
1045
48
1219
50.25
1277
B
1
33.375 (Models through 5/31/09)
32.5 (Models starting 6/1/09)
848
36.625
930
41.5
1054
41.5
1054
48
1219
50.25
1277
C
23.75
603
28.25
718
29
737
29
737
29
737
32
813
D
43.625 (Variable speed models
through 5/31/09)
38.25 (2-speed models
through 5/31/09)
44 (All models starting 6/1/09)
1108
45
1143
51.5
1308
54.5
1384
58
1473
63
1600
E
2
.5
13
1
25
3
76
3
76
1.5
38
2.9
73
F
55.5
1410
64.5
1638
68.5
1740
68.5
1740
72
1829
79
2007
G
2
36
914
36
914
43.75
1111
43.75
1111
48
1219
56
1422
H
8
203
15.5
394
16.875
429
16.875
429
11.375
289
15.75
400
J
43.14
1096
49.8
1265
53.54
1360
53.54
1360
56.4
1433
62.85
1596
K
46.64
1185
53.3
1354
57.04
1449
57.04
1449
59.9
1521
66.35
1685
L
5.12
130
5.12
130.05
7.12
181
7.12
181
7.12
181
7.12
181
M
2.62
66
2.62
66
3.62
92
3.62
92
3.62
92
3.62
92
N
1.37
35
1.37
35
2.25
57
2.25
57
2.25
57
2.25
57
O
3.87
98
3.87
98
5
127
5
127
5
127
5
127
P
2.5
64
2.5
64
2.75
70
2.75
70
2.75
70
2.75
70
Q
2.5
64
2.5
64
3.5
89
3.5
89
3.5
89
3.5
89
1
Overhang dimensions for the optional starch dispenser are as follows: 35, 3.88 inches (9.86 cm); 60, 1.75 inches (4.45 cm); 80 and 100, 0.33 inches
(0.83 cm). (The starch dispenser does not overhang the 125.) (No longer available.)
2
The overhang dimension for the premium wet clean module option (compatible with wet-clean-capable washer-extractors only) adds 24 inches
(60.96 cm) to combined machine dimensions E and G.
Table 6