Alliance Laundry Systems Extractors P232156R9 - Manual (Page 44)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Basic Installation/Operation
F232156 42
NOTE: When washing items which may
disintegrate or fragment, such as mop heads or
sponges, use laundry nets to prevent drain
blockage.
IMPORTANT: To prevent out-of-balance
conditions, premature wear or damage to machine
when using laundry nets, use several small nets in a
load.
5. When loading is complete, make sure that all
fabric is inside the basket.
6. Close and lock the door.
7. Dry supplies can be placed in the supply dispenser
compartment cups prior to the start of each cycle.
Be sure to return the supply dispenser
compartment cups before the start of each cycle.
8. Liquid supplies can be injected directly into the
supply dispenser by an external chemical supply
system.
NOTE: Supply dispenser compartment cups must
not be removed when an external chemical
injection supply system is attached to the washer-
extractor.
9. Select the desired cycle. The corresponding LED
indicator for that cycle will light.
10. Press the Start keypad.
NOTE: The cycle number can be changed during
the FIRST FILL ONLY by pressing another cycle
select key.
11. At the conclusion of the cycle, the display will
show ‘doNE’. The door can be unlocked. At this
point the washer-extractor may be unloaded.
12. When the door is opened, the display will revert
to showing “----” and the default cycle.
Be careful around the open door,
particularly when loading from a level
below the door. Impact with door edges
can cause personal injury.
SW025
CAUTION