Uw models with m30 control – Alliance Laundry Systems Extractors P232156R9 User Manual
Page 33
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Basic Installation/Operation
31
F232156
UW Models With M30 Control
1. When display shows a cycle number, the washer-
extractor is ready to be loaded with laundry.
2. Press the STOP/UNLOCK button located on the
Figure 14
3. Open door within five seconds of pressing the
door unlock keypad.
4. Turn the door handle clockwise and swing the
door left to open it. The door must be opened
within 5 seconds of pressing the door unlock
button. Refer to Figure 15.
Figure 15
5. Load the washer-extractor to full capacity
whenever possible, but do not exceed the rated
dry-weight capacity of the machine if the fabric
to be washed is quite dense, closely woven, and
heavily soiled.
Overloading can result in an inferior wash. The
operator may need to experiment to determine
load size based on fabric content, soil content and
level of cleanliness required. Do not underload
the machine. Underloading can result in
premature bearing and sealing failure and out-of-
balance situations.
Figure 16
PHM758N
PHM593N
PHM590N
WARNING
MACHINE MAY BE HOT
AND CAUSE BURNS
ATTEMPT NO ENTRY UNTIL
BASKET HAS STOPPED
SERIOUS INJURY MAY RESULT