Uw 3 speed models with p-control or s-control – Alliance Laundry Systems Extractors P232156R9 User Manual
Page 29
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Basic Installation/Operation
27
F232156
UW 3 Speed Models with P-Control or
S-Control
Dimensional Clearances
Allow a minimum of 24 inches (60 cm) at the rear and
18 inches (45 cm) at the sides for maintenance,
inspection, and adjustment. Allow at least 18 inches
(45 cm) between machines in multiple installations.
Machine dimensions are indicated in Figure 7 and
specified in Table 10.
NOTE: The dimensions shown here are for
planning purposes only. They are approximate and
subject to normal manufacturing tolerances. If
exact dimensions are required for construction
purposes, contact the distributor or the
manufacturer. We reserve the right to make
changes at any time without notice.
Table 10
UW 3 Speed Machine Dimensions
(Refer to Figure 7)
Dimensions
35
60
in.
mm
in.
mm
A
30.13
765
35.63
905
B
*
32.5
825
36.63
930
C
23.75
604
28.25
718
D
36.75
934
45
1143
E
1
25
1
25
F
55.5
1409
64.5
1638
G
30.5
775
36
914
H
7.63
194
15.5
394
I
43.63
1108
55
1397
*
Overhang dimensions for the optional starch dispenser are as follows:
UW35, 3.88 inches (9.86 cm); UW60, 1.75 inches (4.45 cm).