Hydrotech 6700 XTR Valve Downflow Automatic Water Softeners Service Manual - Manual (Page 3)

Page 3
Job Specification Sheet
NOTE: Some options may not be available depending on valve model or other options chosen.
Circle and/or Fill in the Appropriate Data for Future Reference.
System Type: Meter Immediate / Time Clock Delayed / Volume Override Delayed.
Volume Override Immediate / Meter Delayed Weekly Reserve.
Meter Delayed Variable Reserve / Meter Delayed Fixed Reserve.. . . .
Valve Type:.. . . . . 56XT/6700 Proprietary C
Regenerant Flow: Down Flow / Up Flow / Downflow Double Backwash / Up Flow Back Wash.
Filter / Up Flow Variable Flow
Display Format: U.S. or Metric (French Degrees, German Degrees, or PPM)
Unit Capacity: _____________ Grains/French Degrees/German Degrees/PPM
Water Hardness: _____________ Grains/French Degrees/German Degrees/PPM
Capacity Safety Factor: Zero or ______ %
Volume Override: _________ (Gallons or M 3 )
Regeneration Day Override: Off or Every ______ Days
Regeneration Time:
Delayed _________ AM/PM or ______Immediate
Regeneration Cycle Step #1:. _._.:._._.:._._.
Regeneration Cycle Step #2:. _._.:._._.:._._..
Regeneration Cycle Step #3:..._._.:._._.:._._..
Regeneration Cycle Step #4:. _._.:._._.:._._..
Regeneration Cycle Step #5:. _._.:._._.:._._.
Media Volume:
_________ (CuFt or Liter)
Salt Dosage: _________ (lbs/CuFt or grams/Liter)
BLFC Size: _________ gpm
Auxiliary Relay: Enabled or Disabled
Auxiliary Relay Start 1:. . _.:._._.:._._.
Auxiliary Relay End 1:.. . _.:._._.:._._.
Auxiliary Relay Start 2:. . _.:._._.:._._.
Auxiliary Relay End 2:.. . _.:._._.:._._
Chemical Pump: Enabled or Disabled
CPO Aux Relay Volume: _________ (Gallons or M 3 )
CPO Aux Relay: _._.:._._.:._._
Flow Meter Size: .75” Paddle .75” Turbine
Generic Flow Meter: Maximum Flow Rate: Add _ _ Gallons every _ _ Pulses