Hydrotech 5600 SXT User Programming Chart - Manual (Page 4)

↓
↓ ↓ ↓
Display is BR (BRINE RINSE) → → → →[Factory Setting:
For Chemical Free Iron Filters 0 (0 minutes)
For Iron Filters 50 (50 minutes)
For Softeners 60 (60 minutes)]
Press UP/DOWN buttons to adjust the time.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Display is RR (RAPID RINSE) →
→ → → [Factory Setting:
For Softeners and Iron Filters - 10 (10 minutes)
For Chemical Free Iron Filters – 4 (4 minutes)
]. Press UP/DOWN buttons to adjust the time.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Display is BF (BRINE FILL)→ → → → [Factory default setting: Refer to User Manual].
Press UP/DOWN buttons to adjust the time.
↓ ↓ ↓ ↓
↓ ↓ ↓ ↓
Display is D (DAY OF WEEK) → → → →used to set the day of week in which the regeneration should
occur [Factory Setting: OFF]. Press UP/DOWN buttons to adjust the setting. ONLY
AVAILABLE IF CONTROL TYPE IS SET TO DAY OF WEEK SETTING.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Display is CD (CURRENT DAY) → → → → used to set the current day of week in which the
regeneration should occur Press UP/DOWN buttons to adjust the setting. ONLY AVAILABLE
IF CONTROL TYPE IS SET TO DAY OF WEEK SETTING.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Display is FM (FLOW METER TYPE)→ → → → [Factory Setting: t0.7].Do not change this setting.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
RETURN TO SERVICE
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button