Hydrotech 5600 SXT User Programming Chart - Manual (Page 7)

Model 5600 SXT- Master Programming Chart
FROM SERVICE MODE:-
•
To enter master programming mode, set the Time of Day display to 12:01 P.M.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Press and hold and buttons together until the programming icon
replaces the service icon
Display is DF (DISPLAY FORMAT) → → → → Unit of measure for volume and display format for
time [Factory Default Setting: GAL]. Press UP/DOWN buttons to adjust the settings.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Display is VT (VALVE TYPE) → → → → type of valve setting [Factory Setting: Fltr (Filter)]. Press
UP/DOWN buttons to adjust the settings.
↓ ↓ ↓ ↓
↓ ↓ ↓ ↓
Display is CT (Control Type)→ → → → type of regeneration [Factory Setting: Fd (Meter Delayed)].
Press UP/DOWN buttons to adjust the settings.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Display is NT (Number of Tanks)→ → → → [Factory Default Setting: 1]. Do not change the setting.
↓
↓ ↓ ↓
↓
↓ ↓ ↓
Display is UNIT CAPACITY → → → → Capacity in gallons. [Factory Default Setting: 10000 gallons]
].
Press UP/DOWN buttons to adjust the value.
↓ ↓ ↓ ↓
↓ ↓ ↓ ↓
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button
UP DOWN