Hydrotech 5600 SXT User Programming Chart - Manual (Page 8)

Display is RS (RESERVE SELECTION) → → → → Type of reserve [Factory Default Setting: RC
(Fixed Reserve Capacity)]. Press UP/DOWN buttons to adjust the setting.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Display is RC (FIXED RESERVE CAPACITY) → → → → Reserve capacity in gallons [Factory
Default Setting: 0]. Press UP/DOWN buttons to adjust the value.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Display is DO (DAY OVERRIDE) → → → → [factory default setting: OFF]. Press UP/DOWN buttons
to adjust the setting.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Display is RT (REGENRATION TIME) ([default: 11:00 P.M.]
Press UP/DOWN buttons to adjust the time.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Display is BW (BACKWASH)→ → → → [Factory Setting: 6 (6 minutes)]. Press UP/DOWN buttons to
adjust the time.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Display is BD (BRINE DRAW) → → → →[Factory Setting: 0 (0 minutes)
Press UP/DOWN buttons to adjust the time.
↓ ↓ ↓ ↓
↓
↓ ↓ ↓
Display is RR (RAPID RINSE) → → → → [Factory Setting: 4 (4 minutes)]. Press UP/DOWN buttons to
adjust the time.]
Press UP/DOWN buttons to adjust the time.
↓ ↓ ↓ ↓
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button
Extra Cycle
Button