CAME Krono-S5D Kit - Manual (Page 11)

10
STAGE 2
WIRING AND ELECTRICAL
2.1 - Installing the Motors
Fit the motors to the brackets with the nuts and bolts provided. Ensure that the metal insert is inserted
into the rear bracket to ensure free movement.
Make sure that there is no interference between the motor shaft and the gate wing at any point in the
gate travel. If interference is found, lengthen the front bracket to the minimum length that provides
interference-free operation.
Screws 3,9 x 9,5
Screws M8 x 35
Bush
ø 12 Washer
M8 nut
M12 nut
Screws 3,9 x 9,5
Fig 7