Hach-Lange Filter probe sc - Manual (Page 11)

9
General information
2.5 Target group for these operating instructions
These operating instructions are directed at sewage treatment plant
operating organisations and trained and experienced staff sewage
treatment plant supervisors. It is assumed that these persons are
familiar with the operation of personal computers and have a sound
knowledge of
• Measurement and control systems,
• Electrical engineering,
• Water analysis and
• Chemistry
and have been adequately instructed on safety regulations.
Requirements and activities that go beyond the knowledge and
skills held by a sewage treatment plant supervisor must be
entrusted by this person to trained (e. g. electrical) specialists. Such
work is to be planned and co-ordinated in agreement with the
organisation or plant management.
2.6 Tasks and obligations of the operating organisation
The organisation operating the plant must ensure only qualified and
trained personnel install, operate or otherwise use this probe. The
operating organisation must ensure the locally applicable
regulations are observed and that these operating instructions are
always available to the plant operators.
2.6.1 Correct use
Incorrect use of the filtration probe sc or its components
and / or its accessories can cause injury, damage or pollution.
Ensure the filtration probe sc and / or its components and / or
its accessories are only used correctly.
The filtration probe sc was developed for the filtration, supply and
disposal of liquid samples and for connection to an analysis
instrument. The primary area of application is water and waste
water analysis.
2.6.1.1 Incorrect use
Any other use or use beyond that defined above is considered
incorrect use and will also render void all claims under the
guarantee and warranty.
2.7 Your service partner, contacting the manufacturer
In section Contact on page 39 you will find addresses and
telephone numbers for the various contacts.