Hach-Lange Filter probe sc - Manual (Page 23)

21
Installation
3.5 Connecting filtration probe sc to the data network
To ensure correct operation, the filtration probe sc must be
connected to the analysis instrument's data network. The analysis
instrument's data network sends the commands for self-cleaning
and transmits the module pressure value to the analysis instrument.
1. Connect the data cable connector to the socket on the analysis
instrument ( Figure 9 -4)
(see also the operating instructions for the analysis instrument).
3.6 Connecting sample tubing
Note: Pay attention to the markings on the tubing.
1. Connect the black sample return tubing ( Figure 10 -1) to the
sample outlet on the analysis instrument (see operating
instructions for the analysis instrument).
2. Connect the transparent sample feed tubing ( Figure 10 -2) to
the sample inlet on the analysis instrument (see operating
instructions for the analysis instrument).
Figure 10 Connecting sample tubing
1 Sample return 2 Sample feed