Hach-Lange Filter probe sc - Manual (Page 13)

11
Section 3 Installation
In this section you will find information on the following for the
filtration probe sc
• Installing,
• Connecting,
• Connecting to the mains and
• Connecting to the data network.
3.1 Safety instructions
DANGER
Prior to unpacking, commissioning or operating the
instrument, read all of this manual!
Pay particular attention to all instructions on hazards and
safety. Otherwise there is a risk of serious injury to the
operator or damage to the instrument, or pollution!
The analysis instrument and its peripherals are only allowed to
be installed and connected by qualified personnel. Only use
appropriate (e. g. insulated) tools and observe the applicable
rules and regulations!
Incorrect connection to the data network or incorrect
configuration can result in damage to the modules and the
customer's network!
3.1.1 Safety measures prior to unpacking, connecting and operating
Ensure only trained and instructed personnel unpack, install,
connect or operate the filtration probe sc.
3.1.2 Disposing of the packaging
Protect the environment when disposing of the packaging and
observe locally applicable regulations