Hach-Lange Filter probe sc - Manual (Page 5)

3
Section 1 Specifications
We reserve the right to make changes without notice.
Table 1 Filtration probe sc specifications (in some cases optional extras)
Components Filter module with pump
Dimensions (W × H × D) 330 Ч 384 Ч 243 mm (13 Ч 15.12 Ч 9.57 inches)
Supply tubing 5 m or 10 m, depending on version
Enclosure Plastic enclosure, PPE, flammability class in accordance with UL 94
Mass Approx. 9.5 kg filter enclosure, approx. 8 kg tubing
Power supply Via analysis instrument
Electrical connection Via analysis instrument
Mean power consumption
400 VA (brief peak power consumption: 1000 VA),
(with 10 m heated filtration probe tubing)
Electrical fuse protection Via analysis instrument, via controller
Operating temperature 4 °C...40 °C (39 °F...104 °F), in water
Operating temperature sample tubing –20 °C...45 °C (–4 °F...113 °F); 95 % relative humidity, non-condensing
Storage temperature
–20 °C...60 °C (–4 °F...140 °F); 95 % relative humidity, non-condensing
Once the filter modules have become wet, they must be stored wet.
Sample temperature 4 °C...40 °C (39 °F...104 °F), water temperature
Permissible sample flow speed max. 3 m/s, from 1 m/s: install only with protection against flow (accessory)
Permissible pH value of the sample 5–9
Maximum immersion depth 3 m (120 inch)
Fastening to the extension pipe 6 screws M5 × 10 mm
Filtrate flow rate

5 ml/minute, 4 out of 5 minutes
Cables and tubing on the probe pipe
Outer sheath of the cables and tubing: UV and weather resistant
Total external diameter of the outer tubing: 32 mm (1.2 inch)
External diameter of the sample tubing 3.2 mm (0.12 inch)
External diameter of the return tubing: 6 mm (0.23 inch)
External diameter of the air tubing: 6 mm (0.23 inch)
External diameter of the data cable: 7.1 mm (0.28 inch)
External diameter of the power cable: 6.1 mm (0.23 inch)