Hach-Lange Filter probe sc - Manual (Page 22)

20
Installation
3.4.1 Connecting power cable
1. Open the analysis instrument to which the filtration probe sc is
to be connected.
2. Connect the earth wire ( Figure 9 -3) (see also the operating
instructions for the analysis instrument).
3. Connect the power cable to the filtration probe sc ( Figure 9 -2).
(see also the operating instructions for the analysis instrument)
4. Connect the power cable for the drain heating (optional
accessory) ( Figure 9 -1). (see also the operating instructions for
the analysis instrument)
Figure 9 Connecting power supply and heating to the filtration probe sc
1 Connection drain heating
(optional) 2 Filtration probe sc power
cable connection 3 Earth wire terminal strip 4 Filtration probe sc data
cable connection