Hach-Lange SONATAX sc - Manual (Page 8)

8
General information
2.2 General sensor information
The SONATAX sc is intended for the measurement of sludge levels
in water. Use in other media without test of the materials (refer to
Section 1 Technical data on page 5 ) or consultation with the
manufacturer is regarded as explicitly not in accordance with
requirements.
Any use other than use in accordance with requirements defined in
the user manual leads to the loss of the warranty claims and can
lead to personal injury and property damage, for which the
manufacturer assumes no liability.
2.2.1 Property rights note
Parts of the device software are based on the work of the
Independent JPEG Group.
2.2.2 Usage areas
The SONATAX sc can be used anywhere that the solid/liquid
separation layer must be monitored.

For example in the area of final sedimentation or in sludge
treatment (thickeners).
2.3 Device overview
Figure 1 shows the device components of the SONATAX sc.
Electrical devices marked with this symbol may after August 12, 2005 no longer be disposed of in unsorted
domestic or industrial waste Europe-wide. In conformity with European local and national regulations (EU
Directive 2002/96/EC), European electrical equipment users must now return old or end-of life equipment to
the manufacturer for disposal This is free for the consumer.
Note: Obtain instructions on the correct disposal of all (marked and not marked) electrical products that were
supplied or manufactured by the manufacturer at the relevant sales office.
Figure 1 Device overview
1 Operating state LED (refer to Section 6.1 ) 3 Mount for the tank edge attachment
2 Wiper 4 Sensor head