intimus 26 CC3 - Manual (Page 5)

<< The machine may not be operated by more
than one person at any given time!
The machine was designed for safe operation
by “one person only”.
<< During the shredding process no other
work may be performed on the machine
(for example cleaning, etc.)!
<< The machine is not a toy, and is not suitable
for use by children!
The overall technical safety concept of
this machine (dimensions, feed openings,
emergency shutdown devices etc.) does not
provide for any guarantee regarding hazard-
free operation by children.
<< Danger of injury! Keep all loose
articles of clothing, ties, jewelery,
long hair or other loose objects
away from opening!
<< Danger of injury! Never insert fingers into
opening!
<< In case of danger switch the machine off
with the mains switch, or with the emer-
gency switch, or unplug the machine!
<< Always unplug the machine from the
mains power supply before opening the
machine!
Repairs may only be performed by trained
personnel!
IMPORTANT SAFETY NOTES
9 = Control display
“Motor overload” (fig. 1)
Lights up when the motor has been
overloaded and has switched off. The
machine cannot be started during the
cooling down phase of the motor.
10 = Control display
“User interlock activated” (fig. 1)
Lights up when the user interlock is
activated. To activate the user interlock,
see description in the section “OPERATING
THE MACHINE”.
11 = Control display
“Receptacle full” (fig. 1)
Lights up when the receptacle is full and
must be replaced. At the same time the
machine is automatically switched off.
12 = Paper feed slot (fig. 3)
13 = Safety feed slot (fig. 3)
14 = Paper receptacle (fig. 4)
15 = Collection tray CD/DVD (fig. 4)
16 = Oil receptacle (fig. 6)
The shredder may not be used as a
step ladder or as a seat. Danger of
falling due to breakage!
CONTROLS:
1 = Power plug (fig. 2)
When the machine is plugged in for
connection to the mains, the machine is in
“Sleep” mode.
2 = Function button (fig. 1)
“Ready”/”Sleep”/”Stop”
This button has three functions:
a) “Ready” mode
If this button is pressed briefly in “Sleep”
mode, the machine is switched to
“Ready” mode.
In “Ready” mode, the integrated LED
display lights simultaneously.
a) “Sleep” mode
If this button is pressed and held for
approx. 3 secs. in Ready mode, the
machine is switched to “Sleep” mode.
Note: If the machine is not used for a
period of approx. 30 mins., it switches
automatically to “Sleep” mode.
b) “Stop” function
If this button is pressed when the cutting
mechanism is running, the mechanism
is switched off and stops.
3 = Forwards button (fig. 1)
This button has two functions:
a) If this button is pressed briefly, the
cutting mechanism runs forwards for a
few seconds, e.g. to remove remaining
material from the cutting mechanism.
b) If this button is pressed and held
for approx. two secs., the cutting
mechanism runs forwards continually
and materials to be shredded can be fed
into the machine. At the same time the
integrated LED display lights up.
4 = Backwards button (fig. 1)
When this button is pressed briefly, the
cutting mechanism runs backwards. At the
same time the integrated LED display
lights up.
Note: The cutting mechanism only runs
backwards as long as the button is held
(touch function).
5 = Light barrier (forwards running) (fig. 3)
The shredding operation starts as soon
as material is fed into one of the two feed
slots.
6 = Control display “material jam“ (fig. 1)
Lights if too much material is fed into the
cutting mechanism. The cutting mechanism
halts, then runs one step in reverse and
stops. The motor switches off.
7 = Control display
“Oil cutting mechanism” (fig. 1)
Lights up when the cutting mechanism of
the Cross-Cut version has to be oiled. The
oiling procedure needs to be confirmed
(see “Maintenance cutting mechanism”).
8 = Control display
“Receptacle missing” (fig. 1)
Lights up when the receptacle is not placed
properly under the machine. The machine
is switched off automatically when the
receptacle is removed and cannot be
started if the receptacle is not placed
properly under the machine.
SCOPE OF APPLICATION:
The intimus 26SC2/CC3 // 32SC2/CC3 data
shredder is designed for shredding general printed
material and data media such as CDs, DVDs and
credit cards.
This machine should only be used for
shredding paper and credit cards and
for shredding CDs and DVDs!
Any attempt to shred other types of data
medium may result in damage to the
machine (e.g. destruction of the cutting
mechanism etc.).
INSTALLATION:
- Unpack and set machine upright.
- Place plastic sack into the receptacle.
- Plug in the machine (for instructions for the
necessary precautions see „TECHNICAL
DATA“).
The socket outlet shall be installed
near the equipment and shall be easily
accessible!
Only operate the machine in enclosed
rooms at temperatures between 10°C
and 25°C!
3
9
10
11
4
13
12
6
7
8
2
5
26SC2 26CC3 32SC2 32CC3
1
89894 8 03/13
5
GB
OPERATION
INITIATION
OPERATION
fig. 1 fig. 2 fig. 3
Translation of the Original Operation Manual
Übersetzung der Originalbetriebsanleitung