CTI Products RCD Advanced Client-Server - Manual (Page 143)

MCN Server Program
143 68-11824-210
Email Setup
For Email logging to occur, the following setup requirements must be met:
1. In the MCNConfig program, email groups and recipients must be specified in the " Email
Groups Resource Window " on Page 59 for more information.
2. In the MCNConfig program, the "Email Group" must be specified for each Channel in the
"
Channels Resource Window " on Page 57 for more information.
3. In the MCNConfig program, the "Email" log flag must be set to "Y" in the Display Table
States tab for those statuses you wish to be sent to the email. See page 66 for more
information.
4. Enable Email alerts in the " Logging & Sound " window. To navigate to this window, select
"Logging & Sound" from the Options Menu. See page 142 for more information.
5. Email parameters must be provided in the following window. To display this window, choose
“Email Setup” from the Options Menu.
Parameters in the above window should be obtained from the email administrator at your
facility.
Server IP address or name of the email server at this facility. This can be either
numeric address (such as 10.0.0.41) or a name that points to the email
server through a Domain Name Server (DNS), as shown above.
Port Email server port for accepting incoming mail messages, referred to as
the “Listen Port”
Name A valid email address that the above server services. MCN email alerts
will be “From” this email address. The domain name (the portion of an
email address after the "@" symbol) should not be included in this field.
Password A valid password for the email address used in the “Name” field above.