CTI Products RCD Advanced Client-Server - Manual (Page 145)

MCN Server Program
145 68-11824-210
If the MCN Server program was unsuccessful at logging into the email server, an error
indication will be logged to screen as shown below. Screen logging does not have to be enabled
for this type of screen log to occur.
Printer Setup
For alerts to be printed, printer parameters must be provided in the following screen. To display this
window, choose “Printer Setup” from the Options Menu.
Parameters in the above window can be obtained from the specific printer documentation.
Printer Initialization String This Escape character sequence is sent to the printer at the
start of a new print job. In the example above, ^O instructs
the printer to print without using a bottom margin, since
continuous paper will be used. ^M selects 10.5 points for
the font height and 12 characters per inch horizontally. And
^J specifies the line feed distance.
End of Line This Escape character sequence is sent to the printer after
each line of print. Normally, this should consist of escape
characters for “line feed” and “carriage return”.
Lines per Page Enter the number of lines to be printed on each page.
Form Feed/Page Eject This Escape character sequence is sent to the printer after
the number specified in “Lines per Page” above have been
printed on a page.
Printer Name A drop-down list is provided to select from the installed
printers on this PC.