CTI Products RCD Advanced Client-Server - Manual (Page 52)

MCNConfig Program: Network Interface Window
52 68-11824-210
The HIB-IP unit will appear in the Network Interface window.
It will then be associated with all the hardware modules (such as CIBs, AIBs, and IOBs).
In the MCNConfig Standard program you will be able to have only one Network Interface per system.
(If you need multiple Network Interfaces, like multiple HIB-IP units, you'll need the MCN Advanced
Server software.)
Programming HIB-IP Units
You must use MCNConfig program to download the parameters to the HIB-IP unit before you can use it.
1. Be sure all the HIB-IP and Authorized PC parameters have been entered into the PC
database as described above
2. Connect a Null Modem cable (CTI # 89-11314) between the PC and the Async Serial
Programming connector on the HIB-IP.
3. Go the File menu and select COM Port:
4. Select the proper COM Port and hit OK
.
5. Go to the Network Interfaces window and select the proper HIB-IP unit.
1 2 3 4
5
9 8 7 6
ASYNC
Right-Click on the
HIB-IP