CTI Products RCD Advanced Client-Server User Manual

Page 31

Advertising
background image

Installation

31

68-11824-210

HIB-IP Parameters

As shown in the “

Setup HIB-IP

” window above, you will later enter the HIB-IP parameters in the

system database using the McnConfig program. You will also have to download those parameters to the
HIB-IP using McnConfig.

Miscellaneous Installation Considerations

Changing Settings for your Network Interface

If you need to change the settings for your Network interface, re-run the HWSetup program. This
program can be used to change the:

Type of Network Interface

PCLTA Device or Group & Module address

HIB-232 COM Port or Baud Rate

To change these items you can either:

Double click on the Network Interface to edit its parameters or

Click the Remove button to remove the Network Interface and select a different one.

If you have a Custom Engineered System (with custom system documentation part number KA-8xxxx-
xxx), be sure to set the PCLTA address to the Group & Module numbers shown in your documentation.
Failure to do so may cause the system not to work

In the above window, click the

Next

button

PC Power Options Setup

The “Power Options” icon in the Control Panel allows for a wide variety of PC operation parameters.
However, installation of MCN Server software will disable any possibility of the PC going into a
standby or hibernate condition.

The monitor may be allowed to “sleep” as long as the “Monitor Timeout” is less than the “Standby
Time”. Otherwise, the monitor will never sleep.

Printer Installation

For printer logging to occur, a printer must be installed from the Windows operating system. From the

Start

menu button on the windows desktop, select “Printers and Faxes” from the list, then select “Add a

Printer” from the list of “Printer Tasks”.

Advertising
This manual is related to the following products: