CTI Products RCD Advanced Client-Server - Manual (Page 160)

Appendix: Accessory DOS Programs
160 68-11824-210
Running HIB Configure
Perform the following steps to program a HIB-232 module with the modem "AT" command string:
1. Connect the HIB-232 module to the serial port specified above for the ctihib.sys driver in the
CONFIG.NT file.
2. Ensure that OPTION A Switches 1 and 3 are UP, all others DOWN OPTION B switches
should all be DOWN. SER MODE switches should all be UP.
3. Apply power to the HIB-232.
4. Open a DOS window (click the Start button, select “Run…”, type “ command ” in the text
box, then click OK ).
5. In the DOS window, navigate to the MCNRCD directory for DOS Utilities with the following
command:
cd C:\Program Files\CTI Products Inc\McnRcd Standard\Dos
Utilities\Hib
6. Type the following
hibcnfg /38400 usrspvi
then press the Enter key. “usrspvi” is the name of the file that contains the initialization string for a
generic V.34 US Robotics modem. If your modem is different, check with CTI Products to select
the most appropriate file.Placeholder for Section Header.