ADS-TEC VMT6008 - Manual (Page 17)

VMT6008 16
© ads‐tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden‐Echterdingen
How to operate the Soft Keyboard from Version 3.11::
Activate and deactivate the soft keyboard for letter/character input using
the touch screen
Switches numeric keys on and off (only if numeric keys are visible)
Switching between different representations (Alphanumeric keys 
Numeric keys  Function key bar)
Soft keyboard representation, zoom in
Soft keyboard representation, zoom out
Note:
If a function is to be activated which requires pressing two keys at the same time
(e.g. Alt + F4), these keys have to be pushed one after another at the soft keyboard,
and the special keys Shift, Alt and Ctrl must always be pushed first.
Due to differences in programming of a large variety of software programmes, we
cannot ensure that the soft keyboard works properly with all available software.
When deactivating the soft keyboard, the previously active state (alphanumeric /
numeric keys or function keys) will be stored and will be displayed when re‐
activating the keyboard.
Pos: 22 /Datentechnik/Bedienung/Touch Screen/Touch Screen für VMT 60xx @ 1\mod_1246361069977_6.doc @ 5853 @
5.3 TouchScreen
The control system is equipped with a touch screen monitor. The touch screen monitor is internally connected
with the USB interface. The driver software required for using the touch screen is integrated in the
corresponding operating system, or can alternatively be installed from the enclosed service CD.
Pos: 23 /Datentechnik/Bedienung/Status-Anzeigen/SYS-LED/SYS-LED für VMT60xx-Serie @ 2\mod_1260525540269_6.doc @ 6876 @