ADS-TEC VMT6008 - Manual (Page 5)

VMT6008 4
© ads‐tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden‐Echterdingen
1.5 Copyright
This manual, including all contained figures, is protected by copyright law. Any use for third parties non‐
compliant with the copyright provisions is prohibited. Any reproduction, translation as well as electronic and
photographic archiving and modification shall only be permitted after explicit written authorisation by ads‐tec
GmbH.
Any party in violation of this provision shall be obliged to damage compensation.
1.6 Environmental Conditions
The device may be operated under the following conditions. Failure to observe these specifications will
terminate any warranty for this device. Ads‐tec cannot be held liable for any damages arising due to improper
use and handling.
 Temperature for devices without a heater
in operation ‐20 ... 55°C
for storage ‐30 ... 60°C
 Temperature for devices including a heater
in operation ‐30 ... 55°C
for storage ‐30 ... 60°C
 Humidity:
In operation 10 … 85% without condensate
For storage 10 … 85% without condensate
 Vibration resistance
Standard EN 60068‐2‐6 / 1 G, 10 … 150 Hz
Additionally applies MIL‐STD 810F (01.2000), annex C., figure 514.5C
(US highway truck transportation)
 Shock resistance
Standard EN 60068‐2‐27 / 5 G, with a half‐wave of 11 ms duration