ADS-TEC VMT6008 - Manual (Page 31)

VMT6008 30
© ads‐tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden‐Echterdingen
7 Drives
The storage medium is selected according to the customer requirements. The following options are available for
storage:
Flash SSD: A Flash SSD with a storage capacity of at least 1GB is used. Its capacity depends on the desired
operating system and the additional programmes to be installed.
Note:
Recommendation for the choice of storage medium with a basic installation:
SSD Flash memory: Windows CE 6.0 / Windows XP embedded
Hard disk: Windows XP Professional
Pos: 35 /Datentechnik/Laufwerke/Externe Laufwerke/Externe Laufwerke für OPC 5112 / 5115 / 5117 / IPC 1100 / CPC / PLC / OTC / ITC / VMT-Serie @ 0\mod_1158926656205_6.doc @ 563 @
Externe Laufwerke
By default, no drive for removable media (CD/floppy disk) is integrated in the device. Instead, the system
provides a USB interface, to which an external drive can be connected. In this case you'd have to ensure that the
used device is suitable for industrial environments.
Warning:
Connecting or disconnecting external drives during operation is not admissible, since it
cannot be excluded that the drive might be in use while connecting or disconnecting it.
Data loss might result in the event of non‐compliance!
Pos: 36 /Datentechnik/Software / Treiber Installation/Installation des Betriebssystems/Installation des Bertiebssystems für VMT60xx @ 2\mod_1263211380903_6.doc @ 6940 @