ADS-TEC VMT6008 User Manual
Page 33
VMT6008
32
© ads‐tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden‐Echterdingen
TouchScreen Driver Installation
Note:
When installing the driver, you'll have to take in account that the touch screen monitor is
internally connected with the USB interface!
Touch screen monitor and PS2 mouse can be operated simultaneously.
The installation has to be carried out as described below:
Switch on PC and boot.
Access the service CD by using the Explorer and start the Installer file in the
TouchScreen folder.
Follow the on‐screen instructions and acknowledge the licence terms and conditions.
Once the installer has completed the installation, shut down the computer and restart
it subsequently.
After restarting, the touch screen monitor has to be calibrated. If the driver does not
automatically start, activate the setup menu via "Start => Settings => Control panel
=> Elo Touchscreen".
Via the "Calibration data" menu, calibrating the touch screen monitor can be started,
and the crosses appearing in a succession on the monitor have to be pushed for
calibration. If the cursor position perfectly matches the touch point of your finger,
you can exit this control menu by pushing "OK".