Laurel Electronics Custom ASCII Protocol For Laureate Series 2 Digital Panel Meters, Counters, Timers & L-Series Transmitters - Manual (Page 52)

52
0 0 0 300 baud
0 0 1 600 baud
0 1 0 1200 baud
0 1 1 2400 baud
1 0 0 4800 baud
1 0 1 9600 baud
1 1 0 19200 baud
0 Send Unfiltered Value
1 Send Filtered Value
32 (L) Serial Cnfg2 Bit 7 6 5 4 3 2 1 0
X X X X X Binary Custom ASCII addr. 0-31
0 Continuous Mode
1 Command Mode
0 Alarm data not included with rdg.
1 Alarm data included with rdg.
0 No <LF> Following <CR>)
1 <LF> Following <CR>
6A (L) Serial Cnfg3 Bit 7 6 5 4 3 2 1 0 Data Sent:
0 0 0 Net + Gross
0 0 1 Net Only
0 1 0 Gross Only
0 1 1 Peak Only (Net or Gross)
1 0 0 Net + Gross + Peak
0 <CR> or <CR><LF> at end of all Items
1 <CR> or <CR><LF> at end of each Item
(if no Alarm character)
0 Non-latching RTS
1 Latching RTS
0 Normal Cont Serial TX
1 Special Start, Stop Characters
0 Full Duplex
1 Half Duplex
00 (U) Serial Cnfg4 Bit 7 6 5 4 3 2 1 0 Serial Protocol
0 0 No Parity
0 1 Odd Parity
1 0 Even Parity
0 0 Laurel ASCII (8 Bits, No Parity)
0 1 Modbus RTU Protocol (8 Bits)
1 0 Modbus ASCII Protocol (7 bits)
0 0 1 s Modbus ASCII Gap Timeout