Magnum Venus Plastech High Duo Pro Gun User Manual
Page 16
MAGNUM VENUS PLASTECH HIGH VOLUME DUO PRO GUN
16
5.
Unscrew the auto/manual flush body assembly from the flush valve body.
6.
Remove the grip ring from the push stem of the auto/manual flush body assembly.
Use caution not to lose the spring in the flush body.
7.
Remove the back-up ring and o-ring from the push stem.
8.
Unscrew the flush seal body (5104-23-1) from the flush valve button (5104-25-01).
9.
Remove the spring (9203-2-3).
FLUSH VALVE BODY -
AUTO/MANUAL
SPRING
SEAL
O-RING
O-RING
FLUSH SEAL BODY
FLUSH VALVE NECK
FLUSH VALVE BUTTON
SPLIT SEAL
FLUSH VALVE BODY
10. Use a scribe to remove the o-ring (O-K-008) from the flush valve button.
11. Remove the o-ring (O-A-007) from the flush seal body (5104-23-1).
12. Set parts aside for now or go down to flush valve assembly
13. Discard and replace the flush valve’s o-rings and seals, after reading the note below.
Note: Do not replace o-ring (O-K-008) unless it is worn or damaged. This o-ring
is designed for use with all solvents. In some cases O-K-008 o-ring can be
replaced with the more economical o-ring (O-E-008).