Dis 8 – Mallory Ignition ACCEL DIS 8 75610 User Manual
Page 10
Advertising
DIS 8
10
WASTE SPARK MODE
DIS 8 module used in Waste Spark Mode (typical Chevy)
Set
Ignition Type to Waste Spark Mode. Then go to Firing
Order and select Custom
Firing Order (see page 11). Set the firing order to 1432 when using above diagram.
Note
when in Waste Spark mode the timing value will be doubled when viewed with a
timing light. Example if the timing light flashes at 20 degrees BDTC the actual timing is
10 degrees BDTC.
Do Not touch output/primary coil wires with key ON or while the
engine is running. (Primary and Secondary outputs contain High
Voltage that can be lethal or can cause severe injuries)
Advertising