Mallory Ignition ACCEL DIS 8 75610 - Manual (Page 18)

DIS 8
18
Trigger Mode Select either “8
Channel/Input” or
“Cam/Crank” Input.
Ignition Type Select either “Waste Spark”
(coil fires two cylinders) or
“Coil Per Cylinder”.
Firing Order Select a preset firing order
or “Custom Set” and enter
your own.
To set the modes, plug the controller in and turn on the ignition. After a brief pause,
the controller display will light up. Use the “MODE” keys to select the desired mode,
and then use the “VALUE” up/down keys on the right side to change the values. Once
you have set the values, you can either turn the power off and unplug the controller, or
just leave it plugged in. If you hold any key for 1 second, it will auto-repeat.
Note: The ignition key must be turned off for 10 seconds in order for Ignition Type or Firing
Order changes to take effect.