Minuteman X17 ECO Carpet Extractor - Manual (Page 10)

10
Use philips screwdriver to
unscrew 4 screws and
remove cover. Insert handle assembly in
between bushings. Insert
the shoulder bolt through the
bushing and screw into the
handle assembly using
supplied wrench. Align the teeth on the
bushing and handle assem-
bly before tightening the
adjustment knob.
Attach the wire harness
to the machine. The wire harness must
be aligned with the patterns
on the connector to fit. Screw the cover back
with the 4 screws.
Assembly
Unpack machine.
Spin the adjustment knob
clockwise to tighten.