Troubleshooting guide – Minuteman X17 ECO Carpet Extractor User Manual
Page 28
28
Troubleshooting Guide
Caution!
Unplug power cord before servicing machine components.
Problem
Possible Cause
Remedy
Power cord may be disconnected at the
twist lock or wall outlet.
Check connections and reconnect if
necessary.
Wall outlet breaker may have tripped
Reset breaker.
Circuit breaker in handle tripped.
Reset breaker.
Solution tank in-line filter valve may be
closed.
Open valve.
Sprayjet Switch is in OFF (O) or AUX (II)
position
Flip sprayjet switch to ON (I) position.
No water in solution tank.
Fill solution tank.
Solution hoses may be clogged or kinked. Check hose for clogs, remove any debris if
found. Replace kinked hose if found.
Solution tank in-line filter may be clogged. Clean strainer thoroughly.
The spray jets may be clogged.
Remove the spray tips and clean as
required. Do not clean out the hole in the
jet with a pin or wire. This may cause
permanent damage.
No water dispensed from spray jets
Spray intermittent or streaked
Machine does not function
Troubleshooting