Cord storage – Minuteman X17 ECO Carpet Extractor User Manual

Page 25

Advertising
background image

25

3.

Flush out Recovery Window Extension Hose (page 12, item Q) while Recovery Window is removed by pouring
water/vinegar solution through the hose. Rinse with clear water.

4.

Clean off any debris from the Vac Connection Tube & Recovery Inlet (page 12, items L, M).

5.

Clean & Inspect Vacuum Motor Gasket (page 12, item R) for damage, and ensure Vac Motor Cover (page 12, item
K) is in place.

6.

Inspect Brush Motor Belt for wear (page 12, item H). Replace if necessary.

YEARLY:

1.

Have a qualified service technician check the vacuum motor carbon motor brushes once a year or after every 500

operating hours.

CORD STORAGE

The X17 is supplied with a detachable cord for ease of storage.

Regularly inspect cord for signs of damage. If cord is damaged replace immediately.

Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left
outdoors, or dropped into water, return to service center.

Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around sharp edges or corners. Do
not run appliance over cord. Keep cord away from heated surfaces.

Do not unplug by pulling cord. To unplug, grasp the plug, not the cord.

Do not handle plug or appliance with wet hands.

This equipment should be stored indoors and not exposed to rain.

Maintenance

Advertising