Minuteman Kleen Sweep KS 32 R (6400.40) - Manual (Page 38)

38
Operation
3.10 Fault location
Switch the vehicle off and remove the
key before starting to locate faults.
Problem Cause Solution
Poor cleaning results Side broom or cylindrical broom
worn Adjust or change the side broom or cylindrical broom
Panel air filter soiled Clean the panel air filter
Dirt hoppers full Empty the dirt hoppers
Drive belt defective Change the drive belt
Drive motor defective Contact Minuteman service
Machine swirls dust Sealing strips on broom space
worn Adjust or change the sealing strips
Panel air filter soiled Clean the panel air filter
Bypass still open Close the bypass
Vehicle or sweeping function can-
not be activated Seat contact switch has tripped The operator must be seated in the seat during oper-
ation
Start sequence not maintained Driver on driver’s seat
Drive direction switch in neutral position
Accelerator in zero position
Drive motor is too hot or stops Foreign bodies tangled in the side
broom, cylindrical broom or suc-
tion turbine Remove the foreign bodies