Minuteman Kleen Sweep KS 32 R (6400.40) - Manual (Page 55)

55
Maintenance and Service
5.6.3 Changing the cylindrical
broom
Check the cylindrical broom (Fig. 21/3)
weekly and change it in the case of
wear.
1. Switch the vehicle off using the key
switch and secure with the parking
brake.
2. Remove the dirt hoppers (Fig. 21/1).
3. Loosen the screws (Fig. 21/2) and
remove the first half shell (Fig. 21/3).
4. Then turn the cylindrical broom shaft
(Fig. 21/4) 180º by hand and disas-
semble the second half shell.
5. Assemble the new half shells in the
reverse sequence.
6. The sweeping pattern must be read-
justed after changing the cylindrical
broom.
The half shells are illustrated without
any bristles!
Fig. 21
2 3
1
4