MotorVac OilClean MOF-1000 - Manual (Page 17)

Maintenance Procedures
The following maintenance procedures should be performed on a routine basis: BEST DONE
AFTER A SERVICE HAS BEEN COMPLETED.
1. Clean the exterior with a non-abrasive cleaning agent or similar product to keep the cabinet looking
new. Check the cabinet for dents or impact markings.
2. Check all hoses and wires for cuts or frays.
Enter initials, date, and a check mark in the appropriate boxes of the Maintenance Record at the end
of the chapter.
Replacing the In-line Detergent Output Filter.
1.
Once a year remove back of unit. Remove the hairpin clip from slot in filter (050-1000). Separate the
filter halves by pushing together and rotating counter clockwise. Clean the filter screen and
reassemble.