MotorVac OilClean MOF-1000 - Manual (Page 9)

OilClean Features and Functions
Descriptions of the control switches, and status indicators making up the control panel are listed
below. Please become familiar with these features and functions before using the unit.
A. Air Release Service
Switch
Pressed at end of service to purge any remaining oil/sludge
deposits remaining in engine’s oil pan and to clear oil pump
screen. Requires that shops air hose be connected to air nipple
on side of unit.
B. Power on Switch Press to begin service. Press at end of service after alarm
sounds.
C. Detergent Fill Switch Activates the fluid pump to inject detergent into vehicle.
D. Timer Set Switch Rotate to enter appropriate engine run time. See set up on page
4-3.
E. Power on light Activates power to control switches and alarm.
F. Low oil pressure light Light and alarm sounds if engine oil pressure drops below 5
pounds.
G. 15 amp circuit
breaker
Protects unit’s electrical components.